12
Photo adapter SY10
●
Attaches to the top of the trinocular tube, allowing any SLR camera to be connected to the
microscope for imaging purposes.
●
The SY10 adapter for the selected camera has to be screwed into the adapter before connecting to
the camera. This SY10 adapter can be obtained from any camera store in your area.
●
Can only be used with the SMZ-161T.
C-mount or CS-mount
●
Attaches to the top of the trinocular tube, allowing any CCD camera or imaging device to be
connected to the microscope.
Select either the C-mount or CS-mount according to the CCD camera to be used.
●
Can only be used with the SMZ-161T.
Improved industrial boom stands
●
With new slot / groove design for better locking of microscope.
●
Grub screw locks into slot / groove, stopping tilt. Microscope is positioned vertical to base with no
slant
●
Add position for hand-carrying around four sides
●
Newly design stands can be used in wide-range of our SMZ series microscopes which allows
observing larger viewing samples
●
Only one H3 Allen key is necessary for adjusting the boom stand.
●
Aluminum support collar with elastic plastic gasket to protect and avoid scratches on the column.
