7
•
Mount the condenser with the index marks and aperture diaphragm lever facing forward. Then secure
it with the clamp screw.
•
Insert the phase annular diaphragm slider with centering hexagonal socket head screws facing
the front. See the images above for reference.
3
Installing Objectives
•
Remove the stage plate insert from the stage.
•
Install the objectives into the nosepiece so that the magnification increases with clockwise rotation of the
revolving nosepiece.
•
Replace the stage plate insert.
4
Mounting the eyepieces
•
Remove the dust caps from the eyepiece tubes.
•
Insert the eyepieces into the eyepiece tubes.
•
If the rubber eye guards are to be used, fit them in the groove around the eyepiece.
V Microscopic procedure Interpupillary distance adjustment
•
Before adjusting the interpupillary distance, bring a specimen into focus using the 10x objective.
Condenser Clamp
Screw
Phase Annular
Diaphragm
Slider
Condenser
