4. Sterilization and Cleaning
4.1 Before Initial Use
Prior to using the pump for the first time, sanitize all parts
4.2 After Each Use
1. Wash hands thoroughly before handling breast pump components.
2. Disassemble all parts that come in contact with breast milk including:
Breast shield Breast shield Connector
Valve
Bottle Bottle Disc Bottle Nipple
3. Rinse all parts in cool water to remove breast milk residue.
3. Included With Your Motif Duo:
3.1 User Manual
3.2 Pump Components
*Note:
While unpacking the box, make sure all of the following components are enclosed.
Name
User Manual
Diaphragm
Top
Breastshield
Bottle / 180ml
Power
Adapter
Diaphragm
Breastshield
Connector
Bottle Cap
1
2
2
2
1
2
2
2
Main Body
Diaphragm
Bottom
Valve
Bottle Cover
Nipple
Tubing
Connector
Tubing
Bottle Disc
1
2
2
2
2
2
2
2
Shape
Quantity
Name
Shape
Quantity
4. Wash parts separately in sink with a clean dishcloth or soft brush; or soak
all parts in warm, soapy water for five minutes; or wash separated parts on
the top rack of your dishwasher.
5. Dry with a clean towel and/or allow to air dry on a sanitary surface.
6. Wipe main body of the device with a dry towel after each use.
7. Store dried parts in a clean bag or container. Do not store wet or damp parts.
4.3 Once Daily
1. Sanitize all components that come in contact with the breast or breast milk
once daily.
2. Disassemble breast pump.
3. Place breast pump components in a pot of water. Submerge any pump parts
that come in direct contact with breast milk.
3. Bring water to a boil and allow parts to sanitize for 5 minutes.
4. Once water has cooled, remove parts with caution, as they might be hot.
5. Place sanitized parts on a clean surface and/or towel.
6. Allow parts to completely air dry.
7. Store dry parts in a clean, cool place when not in use. Do not store wet or
damp parts.
4.4 Tubing
1. Tubing should only be cleaned if dirty or if there is any sign of breast milk.
2. Making sure breast pump is off and unplugged, detach tubing from breast
pump unit and breast shield.
3. Rinse tube in cool water to remove breast milk residue.
4. Wash tubing in warm, soapy water and rinse thoroughly in cool water.
5. Hang tubing and allow to air dry completely
*
Note: The presence of moisture in tubing can contribute to the growth of mold.
Examine tubing prior to each use. Discard and replace if there is any indication
of mold.
5. Breast Pump Assembly
1. Wash hands before touching breast pump components.
2. Place the diaphragm downward, so the cross-lined surface is facing
the bottom. Cover the top of the diaphragm and turn it to lock.
3.. Place the breast shield in the breast shield connector.
4. Connect the valve by placing it in the bottom of the breast shield connector.
Screw the bottle into the breast shield connector.
5. Connect the bottom of the diaphragm to the top of breast shield connector.
6. Connect the tubing to the port to the main body of the pump.
7. Connect the other end of the tubing to the bottle block as shown
in the diagram.
8. To clean or store after use, disassemble the bottle in the reverse order.
