Timer
On - This timer indicates the amount since your Motif Duo was powered on.
After 30 minutes it will automatically turn off. [Lo bt] will be displayed when
the battery needs to be charged.
Speed & Vacuum Level
On - Levels 1 - 10 are displayed to indicate which level the Speed
& Vacuum are operating on. 1 is the lowest level, and 10 is the highest.
Massage Mode
On - Operating in Massage Mode.
Flashing - A saved Massage Mode Sequence is operating.
Operating Functions
The Motif Duo software includes three major Features:
Two Pumping Modes, Frequency Function, and Programmable Memory.
Buttons
Each button has three functions.
Pressing the button once will perform a base function.
Holding the button down for a few seconds will engage the secondary function.
Holding the button down longer will engage the advanced function.
Power Button
Turns pump On and Off.
When the pump is On, this will start the stored memory sequence.
When a memory sequence is activated the memory icon will flash on the LCD
display. Operate the pump according to your personal preferences, then press
and hold the button down to save it as a memory sequence. The memory
sequence will not be erased when your Duo is powered off.
Plus Button
Increases the Speed/Vacuum levels during during the Massage and
Expression modes. Will increase the frequency during Expression Mode.
If operating a saved memory sequence, this will cause it to stop,
otherwise there will be no response.
Minus Button
Decreases the Speed/Vacuum levels during the Massage and Expression
modes.Will decrease the frequency during Expression Mode.
This will start a memory sequence, unless you donʼt have one saved, then
there will be no response.
Mode Button
Switches between the Massage and Expression Modes. This will delete a
saved memory sequence. The Memory icon will turn off once the sequence
has been deleted. After a sequence is deleted, your Duo will return to your
previous pump settings.
If no sequence is saved, there will be no response.
Pump Modes
The Motif Duo has two operating modes, Massage and Expression.
Massage Mode
The Massage Mode mimics an infantʼs natural sucking pattern to relax your
breast muscles and stimulate milk flow. This mode operates on 10 different
suction levels, 10 being the strongest.
Expression Mode
Use the Expression Mode for a stronger pull. This mode includes 10 different
suction levels and 10 is the strongest. Increase the suction power by turning
the level up.
Performance
The performance of the Motif Duo is limited to a vacuum greater than -250 mmHg.
6.4 Programming Pump Memory
You can save your preferred settings for the Massage and Expression Modes,
as well as the length of your most productive pumping times.
1. Determine your favorite operating mode along with the suction level
and operating time.
2. Turn your Duo on by pressing the POWER button.
3. Press and hold the POWER button for 3 seconds, to start the memory
programing sequence.
The Memory Icon will flash when your Duo is ready to record.
4. Operate the pump using the desired sequence and suction levels.
5. After pumping, press and hold the POWER button for 3 seconds to
save the sequence.
The Memory Icon will turn on once the sequence has saved.
6. To start your saved memory sequence, press and hold the DECREASE
button for 3 seconds.
Depending on which mode you saved, the Expression or
Massage Mode Icon will flash as the sequence begins.
7. To stop running your saved operating sequence, press and hold the
INCREASE button for 3 seconds, and your pump will return to its
previous settings.
