10
7.2 Power on or off
• If you are holding the device in hand, press and hold
POWER
for 4 seconds;
• If you are wearing the device around your neck with
both hands available, turn
VOL
clockwise and
MODE
anticlockwise at the same time;
MODE
VOL
• If you are wearing the device around your neck with
only one hand available, turn and hold
VOL
clockwise
for 4 seconds.
VOL
You hear a voice prompt regarding battery level (high/
medium/low) when the device is powered on.
7.3 Turning Bluetooth on or off
Bluetooth must be turned on to enable intercom pairing or
mobile phone pairing.
• Press
HDNC
for 3 to 5 seconds to turn on or off
Bluetooth.
7.4 Intercom pairing
To connect two devices for intercom conversation:
1. Press
MFB
and
HDNC
buttons at the same time and
then release the buttons when you hear the voice
prompt “Intercom pairing”.
2. When another device is found in the vicinity, press
MFB
once on either device.
Each device can be paired with another
two devices for “one-on-one” intercom
communication. See chapter “Two-way intercom“.
7.5 Mobile phone pairing
1. Turn on the Bluetooth feature of your mobile phone.
Make sure it is discoverable.
2. Press
MFB
and
HDNC
buttons at the same time and
then release the buttons when you hear the voice
prompts “Intercom pairing” and then “Phone pairing”.
Note:
You will hear the voice prompt “Remote control
pairing” if you keep pressing the buttons after the voice
prompt “Phone pairing”. This feature (remote control
pairing) is still under development.
3. On your mobile phone, select “Motikom - Plus” from
the list of available devices for pairing.
7.6 Second device pairing
The device is capable of pairing with a second Bluetooth
device such as a second mobile phone or GPX device.
1. Turn on the Bluetooth feature of your Bluetooth device.
Make sure it is discoverable.
2. Press
MFB
and
HDNC
buttons at the same time and
then release the buttons when you hear the voice
prompt “Intercom pairing”.
3. Press
MFB
and
HDNC
buttons again at the same time
and then release the buttons when you hear the voice
prompt “Second device pairing”.
4. On your Bluetooth device, select “Motikom - Plus” from
the list of available devices for pairing.
7.7 Pairing with a compatible device
The device is capable of pairing with a third party
neckband. However, the Bluetooth programming of the
third party neckband must be compatible with this device
and using HFP protocal.
1. Turn on the Bluetooth feature of your third party
neckband.
2. Press
MFB
and
HDNC
buttons at the same time and
then release the buttons when you hear the voice
prompts “Intercom pairing”.