Chapter 2
Using your CL900
Using touch 19
6. To adjust the speed and duration of the Press and hold action, under
Pen action
, tap
Press and hold
then select
Settings
. Move the slider
to make your adjustments.
7. To enable the function button on the pen, select
Use the pen button as a right-click
equivalent
.
N
OTE
:
Pen & Input Devices
contains the
Use the top of the pen to erase ink
option, which is not
available on the pen. Instead, you can set the pen’s function button to act as an eraser.
To use the pen function button as an eraser
1. Tap
Pen & Tablet
.
2. Tap
Touch Settings
.
3. Tap the
Pen
tab.
4. Under
Pen button
, select
Eraser
.
Adjusting tablet PC settings
From
Tablet PC Settings
, you can change from right-handed to left-handed use.
To change handedness
1. Open
Motion Dashboard
.
2. Tap
Pen & Tablet
.
3. Tap
Tablet PC Settings
.
4. Select the
Other
tab and make your desired change.
The
Tablet PC Settings
Display
tab has a
Calibrate
option. This does not apply to the
CL900. Instead, if touch input does not behave as expected, you can tune touch as
described in “Using the touch tuning option” on page 17.
The
Configure your pen and touch displays
option on the
Tablet PC Settings
Display
tab is useful for assigning touch to the appropriate display when one or more displays are
connected to the tablet. By default, Windows 7 assumes that an external display is for touch
input. To change this, run
Setup
from
Tablet PC Settings
to assign touch to your tablet
display. If you have multiple external monitors, run
Setup
to assign touch to the correct
display.
N
OTE
:
A keyboard must be connected to the tablet to perform this procedure.
To assign touch to the desired display
1. Open
Motion Dashboard
.
2. Tap
Pen & Tablet
.
3. Tap
Tablet PC Settings
.
4. Select the
Display
tab.
5. Tap
Setup
next to “Configure your pen and touch displays.”
