Chapter 2
Using your CL910
Using touch 23
N
OTE
:
Pen & Input Devices
contains the
Use the top of the pen to erase ink
option, which does
not apply to the CL-Series digitizer pen. Instead, you can set the pen’s function button to act
as an eraser.
To use the pen function button as an eraser:
1. Tap
Pen & Tablet
.
2. Tap
Touch Settings
.
3. Tap the
Pen
tab.
4. Under
Pen button
, tap
Eraser
.
Adjusting Tablet PC settings
From
Tablet PC Settings
, you can change from right-handed to left-handed use.
To change hand orientation:
1. Open
Motion Dashboard
.
2. Tap
Pen & Tablet
.
3. Tap
Tablet PC Settings
.
4. Tap the
Other
tab and make your desired change.
The
Tablet PC Settings
Display
tab has a
Calibrate
option. This does not apply to the
CL910. Instead, if touch input does not behave as expected, you can tune touch as
described in
Using the touch tuning option
on page 21.
The
Configure your pen and touch displays
option on the
Tablet PC Settings
Display
tab is useful for assigning touch to the appropriate display when one or more displays are
connected to the tablet. By default, Windows® 7 assumes that an external display is for
touch input. To change this, run
Setup
from
Tablet PC Settings
to assign touch to your
tablet display.
N
OTE
:
A keyboard must be connected to the tablet to perform this procedure.
To assign touch to the desired display:
1. Open
Motion Dashboard
.
2. Tap
Pen & Tablet
.
3. Tap
Tablet PC Settings
.
4. Tap the
Display
tab.
5. Tap
Setup
next to “Configure your pen and touch displays.”
6. Tap
Touch Input.
7. Press the
Enter
key until you see the instructions appear on the display that you want to
use for touch input.
8. Follow the on-screen instructions.
