Motion Computing LE1600
TC
Tablet Client User Guide
47
Chapter
2
Using Your Motion Tablet Client
5. Type in a New Password.
6. Tap
Enter
.
7. Type in the password to confirm it.
8. Tap
Enter
. The system returns to the Security screen and the HDD
Password is Set. (When you exit then re-enter the PhoenixBIOS
setup, the HDD Password is Locked.)
9. If you have finished setting up a password, tap
Exit
or press the
Esc
key on the Tablet Client to exit the PhoenixBIOS Set Up Utility.
10. When you exit, you are prompted to select from the
following options:
• Exit Saving Changes
• Exit Discarding Changes
• Load Set Up Defaults
• Discard Changes
• Save Changes
11. Select the desired action.
12. Confirm the selection by tapping
Yes
.
Clearing Tablet Client Security
To clear the Tablet Client PhoenixBIOS security:
1. Start the Tablet Client.
2. When the Motion Computing splash screen appears, quickly press
Rotate Display button. If you miss the splash screen, turn the Tablet
Client off then back on and try this step again.
3. From the PhoenixBIOS Set Up Utility, tap Security on the menu bar.
If you have rebooted, you will be prompted to enter the password(s)
you have set up.
4. To clear the System and Password on boot passwords, double-tap
Enter next to Set System Password.
5. Type in the Current Password.
6. Leave the space blank next to Enter New Password.
7. Tap
Enter
.
8. Leave the space blank to Confirm New Password.
9. Tap
Enter
.
10. When the Security screen appears, the System Password should be
Clear and the Password on boot Disabled.
11. To clear the HDD password, double-tap
Enter
next to Set Hard Disk
Password.
12. Type in the Current Password.
13. Leave the space blank next to Enter New Password.
14. Tap
Enter
.
15. Leave the space blank to Confirm New Password.
16. Tap
Enter
.
