Chapter 3
Using the System
29
Using the smart card reader (optional)
Some tablets contain the optional smart card reader. Using smart card software, this device
reads information from the smart card when the card is inserted into the reader.
Depending on the smart card software you are using:
•
You may receive an acknowledgement for when the smart card is fully engaged in the
reader.
•
You may receive a prompt or be required to shut down the software before removing
the smart card.
•
Some smart cards may require you to insert the smart card for authentication, and then
remove the smart card when authentication is completed.
•
Some smart cards may require keeping the card in the reader while the smart card
software is running.
To insert the smart card
1. Place the smart card in front of the smart card reader with the metal contacts of the
embedded chip facing the back of the tablet.
2. Slide the smart card into the smart card reader until the card is firmly seated in the
reader.
To remove the smart card
1. Depending on your smart card software, you may be required to first shut down the
smart card software before removing the card. With this type of software, removing the
smart card while the tablet is running can result in logging off or shutting down the
tablet.
2. Pull the card straight out of the reader.
Smart card
Smart card reader
Summary of Contents for Motion C5v
Page 1: ...User s Guide Motion C5v Motion F5v...
Page 6: ...vi Contents...
Page 24: ...18 Chapter 2 Features...