background image

- 5 -

3.  Before completing the installation- determine the final height

and

fore/ aft position (depth) of the lateral

hip pad relative to the upright plate:

i)  The hip pad can be installed onto the upright plate at one of two height positions- see Important note

below. 

(

note:

A maximum 

1/2” 

of height adjustment is available via the plate).

ii)  The fore/aft adjustment of the hip pad will vary depending on the selected pad style- see

Figure 2.0

below. 

(

note:

fore/aft adjustments are available in 

1” 

increments along the length of the hip pad).

Once the final mounting position has been chosen, secure the Lateral Hip Pad onto the upright plate using
the hardware provided- refer to 

Figure 1.0

- Step 

C.

)

Figure 2.0

PLEASE NOTE:  

There are 4 optional lateral hip pads sizes available; the height adjustment remains

common for all pad sizes, however, the for/aft adjustment can vary depending on the style of pad select-
ed.  Please refer to 

Figure 2.0 

below for details on the various pad options and adjustments .  

2.0   Installation & Adjustment

Important!

- all four (

4

) mounting screws 

(provided) 

must 

be used to secure the hip pad onto the plate;

if the overall height or depth cannot be achieved via the adjustment in the hip pad, then adjustments must
be made via the stop bar or the mounting bracket.

4.  Secure the Lateral Hip Support Assembly into place on the seating system:

i)   

for fixed hip supports:

tighten the set-screw in the mounting bracket until it is snug up against the

upright plate (refer to 

Figure 1.0

).

ii)  

for removable hip supports:

tighten the hand-wheel lock in the mounting bracket until it is snug up

against the upright plate (refer to 

Figure 1.0

).

5/8” increments

total adjustment

range of 1-7/8”

1/2” height

adjustment

(2 positions)

Lateral Hip Support Adjustments

(left side shown)

1” 

1”

1” 

1”

1”

1”

total adjustment range of 3”

total adjustment

range of 3”

total adjustment range of 3”

3-1/2”W x 4-1/2”H

6”W x 5”H

12”W x 3-1/2”H

8”W x 3-1/2”H

Hip Pads

(4 sizes available)

non-

adjustable 

upright 

plate

mounting bracket

stop bar

{

{

Reviews: