27
11. BATTERY
OVER-CURRENT PROTECTOR
The power wheelchair is also equipped with an over-current protector. If the current supplied to
the motor is too high, the over-current protector will cut off the current supply. If the climbing
gradient is greater than 6 degrees, the load exceeds 120kg, or the motor is blocked, the over
current protector will be activated and the wheelchair controller will cut off the circuit to prevent
over current and overheating of the motor.
Battery Socket Cleaning
1. Check the battery pack and the positive and negative poles for any corrosion. If any, clean
the charging port with battery cleaning tools, such as steel brush and medium sand paper.
2. Clean up all the metal dust carefully.
3. Check if the battery and the plastic battery pack are assembled appropriately.
Do not allow the substance inside the battery contact with your skin, clothes or
other items. The acidic substance is extremely hazardous and may cause
serious burn. When contacted, immediately flush your skin with cold water.
If the condition is severe or the substance contact with your eyes, please seek
medical attention immediately.
Summary of Contents for AE001
Page 1: ...User Manual PRODUCT CODE AE001...
Page 34: ...34 NOTES...
Page 35: ...35 NOTES...
Page 36: ...36...