21
22
How to unfold the scooter (Figure 26):
1. Place the scooter to a flat ground and lay down the scooter
2. Make sure the scooter is power off, however is awake for unfolding (the light indicator M will
be orange).
3. Press unfolding button on the remote or scooter once to auto-unfold the scooter.
4. When folding and unfolding, the seat shall automatically shift to its position, however,
please double check and push seat to its locked position (green) manually if not.
5. Flip up the seatback and double check if lock is all in its position before you get
on the scooter.
5. FOLDING / UNFOLDING YOUR SCOOTER
Figure 26
• Please turn off the power before folding / unfolding, the scooter can only be
folding / unfolding when it is power off, the folding / unfolding light indicator will
be orange.
• There is protection for tapping error; scooter cannot be unfolding when it is in
standing position.
• Actions will stop if any foreign objects are detected during folding / unfolding
process. Please remove the objects and conduct the actions again.
• When operating the remote, please stand beside the scooter for best receiving
signal.
• When operating the folding / unfolding buttons on scooter, please reach the
buttons from the back of scooter. User may get pinched if reaching buttons from
other sides of scooter.
• The scooter may not be folded / unfolded if the battery is low, please re-charge
the scooter by upper tiller charging port immediately and operate the folding /
unfolding later when the scooter is fully charged. (see section 6-4)
• Check and replace the battery for remote control if the scooter is not able to
fold /unfold.
1
4
2
5
6
3
