56
Chapter 3
Caring for your CL900
Caring for the pen
N
OTE
:
Motion Computing maintains a
list of tested cleaning solutions
and chemical disinfectants
on its website. You can also purchase protective display films from the
Motion Computing
Accessories
page.
•
If liquid is spilled on the display, wipe it up immediately with a soft cloth like the one
provided with the tablet.
•
Use only the CL900 pen to write on the display. Any other object could damage the
display surface.
•
Protect the display surface from unnecessary contact by using a case when transporting
the tablet PC. Motion Computing sells a variety of cases for the CL900. You can purchase
one at the
Motion Computing
Accessories
page.
•
Cover the display with a protective display film that you can purchase at the
Motion
Computing
Accessories
page.
•
Avoid exposing the display to direct sunlight for long periods of time.
WARNING:
Do not use any corrosive or abrasive cleaners to clean or disinfect the tablet. A
list of tested cleaning solutions
and chemical disinfectants is available on the
Motion
Computing website
.
Caring for the pen
If you use a pen with your tablet:
•
Store the pen in the pen storage drawer, tip down, or in a case when not in use.
•
Avoid storing the pen vertically on its tip (when not in the storage drawer). It can
damage the pen-to-digitizer function.
•
Keep the pen away from any liquid because the pen contains electronic components
that could be damaged when wet.
•
In certain environments, particles or debris can stick to the pen tip or the tablet PC
display. Make sure you wipe off the pen with a soft cloth to avoid scratching the display.
•
Under normal conditions, the CL900 pen tip should not require replacement. However,
extra pen tips are available if you want to replace one.
N
OTE
:
To order pens or new pen tips, go to
Motion Computing Accessories
.
Caring for the tablet battery
To maximize the performance of the battery, condition the battery once a month. To
condition it, run the tablet on battery power until the battery’s charge level drops below 20
percent. Then use AC power until it is fully charged.
You will receive a message if the tablet detects that the battery needs conditioning.
For more information about batteries, see “Using the battery” on page 47.
