8
3.8 Controller
The Controller is fixed in the rear cover and it receives the signal from the control panel and transfers the
signal to motor, brake, and bulb. You should not remove the cover yourself any work on the controller
needs to be carried out by a fully trained technician or you may void your warranty.
Warning:
when you are turning or driving backward, please do not adjust the speed to the maximum speed.
3.9 Brake
The Solax Transformer ST has an electromagnetic break. This means that it engages
automatically as soon as you let go of the tiller. Please see 3.10 to see how to disengage the
brake.
3.10 Freewheel Lever
When you need to move the scooter
manually, you can flip the lever back to
engage “free-wheel” mode. (Fig.10).
Please note, you will not be able to drive your
scooter in free-wheel mode. Once the lever is
back to the drive position. You may need to
turn the scooter on/off before driving.
Fig.10
3.11 Motor/Transmission component
Motor/ Transmission component as a mechanical and electrical part will convert the electrical energy to rear wheel
drive.
4 Electric Folding and Unfolding
Remote control - Fig.11
Fig.11
4.1 Automatic folding and unfolding using the remote control
Press the “B” button and the scooter will fold automatically.
It will stop halfway to ensure there are no obstacles
Pres the “B” button again and the scooter will continue folding
After it is folded completely, you will hear “click”
sound and a few short beeps.
To unfold follow the above instruction, but use the “A”
Button instead
