13
POWER & BATTERY LEVEL
There are two LED meters on the display which indicate both battery capacity and current
speed setting.
The right LED meter (fig. 1) shows the battery capacity (5 green bars and 2 red).
The trolley is designed to protect your battery from being fully discharged. Should your
battery capacity drop too low, the trolley will cut power to the motor.
OPERATING THE C-TECH
To start the trolley, simply turn the Speed Dial to select your required speed (1-10) and press
the Pause/Resume button.
The left LED meter (fig. 2) shows the current speed setting (up to 10 green bars) and will
flash while the trolley is stationary. A numerical display will appear when the speed is
being changed.
When the Pause/Resume button is pressed, the green bars will stop flashing and “PLAY” will
be shown on the display. The trolley will smoothly accelerate to the desired speed. (fig. 3)
To stop the trolley, simply press the Pause/Resume button again and “STOP” will be shown.
The C-TECH has a “Glide Stop” feature that will decelerate the trolley smoothly.
fig. 1
fig. 2
fig. 3
