16
SETTING/RESETTING THE CLOCK
To set or reset the digital Clock:
1. Hold down the Pause/Resume button until 00:00 (fig. 1) shows on the display
2. Turn the Speed Dial to select the desired hour
3. Press the Pause/Resume button once
4. Turn the Speed Dial to select the desired minutes
5. Press the Pause/Resume button again to set
USING THE USB CHARGING PORT
The C-TECH features a USB Charging Port designed to power GPS devices during your round.
Simply remove the covering cap and plug a USB cable into the charging port located on the
underside of the handle (fig. 2). The device will continue charging for the duration of time that
the cable is attached and the battery is connected.
It is important to note that the speed of charge will be lower than that of a mains AC charger
and similar to plugging the device into a PC.
The USB charger takes power from the main trolley battery and continuous charging will
reduce the battery capacity between charges.
fig. 1
fig. 2
