Page 20
M3 PRO - Adjustable Distance Control
Using the Adjustable Distance Control
1. Whilst stationary, select the speed at which you wish the trolley to start
2. Hold down the central ‘on/off’ button for 2 seconds
3. The Distance Display will change to indicate ‘05’ (5 yards or metres) and the letters ‘ADC’ will
appear under the speed setting
4. Rotate the button clockwise to increase the distance and anti-clockwise to decrease (fig. 1)
5. Press the button down once to set the trolley off in motion
6. The distance will count down in increments of 1 yard/metre until the desired distance is reached.
The trolley can be stopped at any stage by pressing the central button once
In the unlikely event that your trolley fails to register distance whilst in ADC mode, the trolley will cut
power to the motor to prevent the trolley from travelling too far. The trolley screen will flash ‘dist’ to
indicate that this safety feature has been activated (fig. 2).
The trolley can be reset by pressing the on/off button once, thereby allowing you to continue to use
the trolley with ADC disabled until you are able to contact our technical support team.
Fig 2
Fig 1