Page 22
M3 PRO - Using the Competition Mode
Using the Competition Mode
It is possible to temporarily disable the distance measuring functions using the competition mode
should competition rules dictate. It is recommended that you always check competition rules before
using your trolley with distance readings enabled.
To enable the competition mode the trolley must be stationary. Hold down the left and right buttons
together for 3 seconds. The round timer will start flashing, keep pressing the buttons until the distance
readings are removed from the screen and the words ‘COMP MODE’ appear (fig. 1). To return your
trolley to normal mode, simply perform the procedure again.
NB : If you release the buttons before entering or exiting competition mode, the round timer will reset.
Fig 1