- 14 -
Riding Scooter
:
WARNING:
Wear trousers to avoid touching the exhaust pipe and getting burned.
Always wear a helmet. All riding apparel must be worn according to all
requirements of the traffic laws.
Take a safety riding course.
NOTICE:
Control the speed and load during the first 500 miles of break in period.
Load should be within 350lbs(including driver).
Speed according to Break in Chart:
Log Miles
0-100
100-300
300-500
Speed (mph)
<30
<45
<55
- 15 -
Riding operation
·
Release rear brake lever, accelerate slowly with throttle grip, motorcycle will move forward smoothly.
·
Accelerate slowly with your left leg in a balanced position right leg should be on floorboard obtain a good
speed, close the throttle to cut down on speed.
Warning:
·
Do not accelerate suddenly with throttle grip to prevent the motorcycle from rushing out and loosing control.
·
Before driving remove bike from center stand. NEVER rock the bike off center stand while accelerating.
Brake operation:
1.Throttle grip control:
If you want to reduce speed, you must control the throttle grip. Use both brakes to slow down, this point is
very important.
Notice: When driving on damp or loose roads or poor weather conditions, that caution when adding
brakes or accelerating.
2.
Operate front and rear brake:
Notice: When driving on a decent use both brakes to reduce speed. Never use brakes continuously, or
overheating will destroy the ability of the brakes to stop the bike.
Warning: Never use a single brake when driving at high speed, especially on crooked and slippery
roads. Always use both brakes to avoid accidents.
Close engine
（
（
（
（
Fig.19
、
、
、
、
Fig.20
）
）
）
）
