- 24 -
The carburetor adjusted perfectly from the factory, if the
carburetor comes out of adjustment; have it adjusted by a
professional.
Warm up engine very well before starting.
Idle adjust screw (1) turn to right to speed up turn to left to slow down.
After adjusting the idle, adjust throttle handle cable to free path for 2-4mm,
use adjustor (2) to
adjust, screw down nut, then tighten set nut (3).
Adjust idle to 1200 rpm
Change engine oil and clean strainer of oil filter
•
Change engine oil
（
（
（
（
Fig25
）
）
）
）。
•
Change the engine oil while engine is warm.
Clean the strainer.
•
Take out oil plug cover and oil filter 1 take strainer 2 and spring 3!
•
Using carburetor cleaner/or air clean and dry the strainer.
•
Reinstall oil filter, strainer and spring!
Fig.23
Fig.24
- 25 -
•
Refill the engine with Castrol 10w-40 semi synthetic oil.
•
Check dipstick for proper level and reinstall
•
Start engine and idle for a few minutes then turn off.
•
Check the level of engine oil again, makes sure there are no leaks.
•
Keep records of your oil Change and receipts for oil these must be
available for warranty claims.
