- 26 -
Change gear oil
（
（
（
（
Fig26
）
）
）
）
Suggestion engine oil No:
SAE 80W/90
Oil Capable
Resolving capacity
：
.10 quart
Changing capacity
：
.10 Quart
Park the bikes with the main stand
•
Take out the gearbox drain bolt (2), and the refill bolt (1).
•
Drain oil into a small pan for proper disposal.
NOTICE:
THE TRANSMISSION MUST BE WARM
。
WHEN DRAINING,
AND THE VEHCILE MUST BE STEADY ON THE MAIN STAND!
•
Reinstall the drain bolt after draining oil.
•
Inject 100ml or .10 quarts to engine through refill bolt
•
Using an injection tool, inject the oil into the bolt, till full.
•
Install refill bolt and tighten snugly.
1
Fig26
- 27 -
Spark plug(Fig 27)
Specifications of spark plug
Standard:
：
C7HSA
（
NGK
）
•
Take spark plugs, clean them of any build up set the gap and install. If unsure about spark plug
condition install new.
•
Examine if there is dirt on poles and the porcelain head in center .If
it has corroded, change it .Use wire brush if needed.
•
Normally the gap between side electrode (1) and
Center electrode (2) is 0.6-0.7.
•
Don’t use off brand spare plug
Fuse replacement
The specified electric current of the total fuse is 15 A
If the connection is not good, the fuse will overheat and meltdown.
Do not use any fuse which specifications are different from assigned. To do so could cause wires to melt,
burn or catch fire.
(0.6
～
0.7)mm
1
2
(0.6
～
0.7)mm
1
2
Fig27
