headline bars
tabs
con
tinua
tion tabs
not
es
w
ar
nings
headline bars
tabs
continuation tabs
notes
warnings
model no. 009-0078-8 | contact us 1-888-942-6686
4
SAFETY INFORMA
TION
INTRODUCTION
The MotoMaster
®
Wall-mounting Tire Rack is
perfect for storing seasonal tires. Easily holds up
to 4 vehicle tires. Strong and durable steel tubing.
Simple and quick installation by attaching two
steel frame directly to the wall studs with 48”
(121.9 cm) distance centre to centre. Maximum
capacity of the tire rack is 375 lb (170 kg) evenly
distributed.
SAFETY INFORMATION
• Do not modify the tire rack and do not use
this product for purposes that it was not
designed for.
• Never exceed the maximum load capacity of
375 lb (170 kg). Centre the load on the rack
to equalize torsional stress. The tire rack is
designed to hold 4 vehicle tires.
• Be aware of the danger of “dynamic loading”.
This situation arises when a load is dropped
onto the tire rack, resulting in a short term
excessive load. Dynamic loading can result
in damage and failure of the tire rack and
personal injury to the person loading the tire
rack.
• Keep children and spectators away when
loading and unloading the tire rack.
• Only set up the tire rack against a wall
that has vertical studs and is capable of
supporting the weight of this product and its
maximum load capacity of 375 lb (170 kg).
Locate this product in a safe area, away from
all flammable materials.
• This product requires some assembly and
set-up. If you are not experienced or capable
of doing this type of assembly and set-up
work, the tire rack should be assembled and
set-up by a qualified service technician.
• Periodically check that all hardware is tight
and secure. If any damage to the structure of
the tire rack is noted, the product should be
replaced.
• Work safely. When drilling holes to mount this
product make sure that there are no hidden
utility lines or pipes in the drilling path.
• Wear ANSI-approved safety goggles and
heavy-duty work gloves during installation
and use.
• Always drill pilot holes and make sure the
pilot holes are longer than the lag screws
provided at least, before driving lag screws
into the wood wall stud.
PERSONAL SAFETY INSTRUCTIONS
• It is the owner’s and/or operator’s
responsibility to read and understand all
WARNINGS and operating instructions
contained on the product labels and within
the instruction manual prior to operation of
this product.
• It is also the owner’s and/or operator’s
responsibility to periodically inspect and
maintain this product and its labels. Read the
product labels and instruction manual prior to
operation of this product.
TECHNICAL SPECIFICATIONS
Model
009-0078-8
Maximum Capacity
375 lb (170 kg)
evenly distributed.
Mounting Width
Required
48” (121.9 cm)
Tire Capacity
Holds up to 4 vehicle tires
headline bars
tabs
con
tinua
tion tabs
not
es
w
ar
nings
TECHNICAL SPECIFICA
TIONS
