5
Inflating tires
Inflating sports equipment and/or small inflatables
Model no. 299-6952-8 / Contact us
1 888 942-6686
IMPORTANT
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
1
2
3
1. The product records the previous pre-set pressure. For example, if your pre-set pressure is set
at 35 PSI, the product records the pre-set pressure at 35 PSI for the next time.
2. Before reaching the pre-set pressure, the compressor can be shut off manually by pressing the
compressor button.
3. When the compressor shuts off automatically, turn the compressor button to off, then restart the
unit if needed.
Press pressure setting buttons ‘+’ or ‘-’ to check the pre-set pressure. When the
gauge shows “Target”, then the setting showing on the gauge is the pre-set
pressure.
Adjust to your desired pressure by pressing the pressure setting buttons ‘+/-’.
Press button ‘+’ to increase the pressure and press button ‘-’ to decrease the
pressure. Once the desired pressure is reached, stop pressing the buttons. The
display will return to 0 PSI automatically. That means the pressure is preset
successfully. The product is ready for inflating.
In the process of inflating, the pre-set pressure can not be adjusted.
Roll out the 12 V cord and connect the 12 V adaptor to the 12 V outlet.
Adjust to your desired pressure (refer to Pressure Pre-Set).
Screw the thread connection onto tire’s valve stem.
Press the compressor button and compressor will begin to inflate.
Press LED light button for visibility in the dark. Press again to turn it off.
When the tire’s pressure reaches the pre-set pressure, the air compressor will stop
automatically.
Remove the thread connection from the tire and disconnect the 12 V car adaptor.
Roll out the 12 V cord and connect the 12 V adaptor to the 12 V outlet.
Adjust to your desired pressure (refer to Pressure Pre-Set).
Screw the ball/ballon adaptors into the thread connection.
Insert the adaptors into valve of object to be inflated.
Press the compressor button and compressor will begin to inflate.
Press working light button for visibility in the dark. Press again to turn it off.
When the pre-set pressure is reached, the air compressor will stop automatically.
Remove the adaptors from the inflated object’s valve and unscrew the adaptors from the
thread connection. Put the adaptors back into the storage compartment.
OPERA
TION
