SAFETY
7
WARNING
•
DO NOT allow unskilled or
untrained individuals to operate
the power tool.
•
This air compressor operates on
DC 12 V and AC 120 V. DO NOT
attempt to operate this air
compressor with any other
source or voltage. DO NOT
rewire or reconfigure the air
compressor from its original
design, as doing so may lead to
personal injury or bodily harm.
•
Wear suitable protective
equipment like gloves, hard hat,
ANSI
-
approved earplugs,
electrically non
-
conductive
clothes and non
-
skid footwear
when working.
•
Ensure that your vehicle’s 12 V
power outlet is free of any ash
residue or debris. A dirty 12 V
power outlet can cause the air
compressor and power cord to
overheat. Overheating can cause
damage to your air compressor/
vehicle and could cause bodily
harm or injury. Disconnect
power when not in use.
•
Risk of eye injury: Wear safety
glasses with side shields when
operating the tool and verify that
others in the work area are also
wearing safety glasses. Safety
glasses must conform to
American National Standards
Institute (ANSI Z87.1)
requirements and must provide
protection from flying particles
from the front and the sides.
•
Inhalation risk: Wear a full face
shield if your work creates metal
filings or wood chips. Wear an
ANSI
-
approved dust mask or
respirator when working around
metal, wood, and chemical
dusts and mists.
