CAUTION!
Only use the cables provided with your power inverter.
• Screw off the caps of the DC cabling terminals (B / C).
• Connect the cable with the DC cabling terminals (B / C).
CAUTION!
Make sure to connect the
RED CABLE TO POSITIVE PORT
(+) and the
BLACK CABLE TO
NEGATIVE PORT
(-).
• Place the red cable connector on the positive DC cabling terminal (+ / red). Make sure that
the respective holes are matching. Screw the red cap back on the cabling terminal until the
cable connector is tightly fixed.
•
• Place the black cable connector on the negative DC cabling terminal (- / black). Make sure
that the respective holes are matching. Screw the black cap back on the cabling terminal
until the cable connector is tightly fixed.
POSITIVE
RED
CABLE CONNECTOR
NEGATIVE(-) BLACK CABLE
CONNECTOR
Connecting the power inverter to a 12 V outlet (loads under 100 W)
• Follow the instructions in the previous section. Choose the DC cable with the 12 V outlet
plug (J) ( See connecting the connector cables to the power inverter).
• Plug the 12 V outlet plug into the vehicle's 12 V outlet of your vehicle. Make sure the plug is
fully inserted.
• The power inverter is now ready for use.
CAUTION!
Always disconnect the power cable from the vehicle's 12 V outlet when you are not using
the device.
18
model no. 011-1870-6 | contact us: 1-877-466-8191
19
OPERATION
OPERATION