IMPORTANT!
The device is not suitable for professional or industrial use.
Before you start
• Unpack the power inverter. Inspect the unit for damage. If the unit has been damaged,
contact the retailer immediately.
The carton should contain:
• Power Inverter
• DC cable with 12 V outlet plug (J)
• DC cable for direct connection to 12 V battery (I)
• Owner’s manual
• Check the power inverter's identification label to ensure that you have purchased the
intended model and that it has the required specifications for its intended use.
• Positioning of the power inverter:
Position the power inverter on a flat and stable surface in a location that is:
DRY
Do not expose to water, rain, moisture, snow or spray.
COOL
Operate the power inverter in ambient temperatures between 0°C
and 40°C (32°F and 104°F). Keep it away from heating vents and
direct sunlight. We recommend using the power inverter in
environments not exceeding 25°C (77°F).
WELL-VENTILATED
For proper cooling, allow at least 2" (5 cm) of clearance around
the power inverter.
CLEAN
Choose a location that is free of any debris that could get into the
power inverter.
SAFE
Do not install the power inverter in a compartment with
batteries or flammable liquids, such as gasoline, or explosive
vapours.
Connecting the power inverter
CAUTION!
Prior to connecting to the power source:
Make sure that the total wattage of the devices you are planning to connect to the
power inverter does not exceed the maximum load of the respective power outlet.
LOAD CONNECTED (W)
CONNECTION WITH
12 V OUTLET PLUG
CONNECTION WITH
VEHICLE BATTERY
Continuous load under 100 W Yes
Yes
Continuous load between
100 and 240 W
No
Yes
Connecting the connector cables to the power inverter
• Make sure that the power inverter is switched off by verifying that the on/off switch (H)
is set on the "0" position.
• Choose the DC cable (I / J) suitable for connecting the AC products that you want to
operate.
< 100 W
< 240 W
16
model no. 011-1870-6 | contact us: 1-877-466-8191
17
OPERATION
OPERATION
