background image

Determining the maximum load of connected devices

WARNING!

DO NOT

 overload your power inverter! Overloading the power inverter, even for a 

short time, could result in serious damage to the power inverter and/or to the connected device.

A few simple steps are necessary to avoid overloading the power inverter:

•  Identify all devices that you would like to power.

•  Add up the total wattage of devices that will be powered. The wattage can be found on the individual 

device’s rating plate, as well as in the instruction manual.

IMPORTANT!

In some cases, the wattage might not be listed on the devices you want to connect to the 

power inverter. In that case, calculate the wattage using the following equation:

VOLTS x AMPERE = WATTS

Formula: 115 Volts x 

X

 Amperes = 

XXXX

 Watts

Example: 115 Volts x 

5

 Amperes = 

600 

Watts

CAUTION!

Understand the difference between rated (running) wattage and surge (starting) wattage.
The 

RATED (RUNNING) WATTAGE

 is the average amount of power that a device consumes 

continuously.

The 

SURGE (STARTING) WATTAGE

 is the amount of power that a device consumes at start-

up for a limited period of time (2–3 seconds). Some devices (e.g. induction motors of air 

conditioners and refrigerators) may have a start-up surge of 3 to 7 times the rated wattage.

IMPORTANT!

The power inverter can supply momentary surge power that is higher (1500 W) than 

its maximum power rating (750 W). Some products with a rated wattage lower than the 

maximum power rating for your power inverter may still exceed the power inverter's surge 

capability and trigger an overload shutdown.

Products rated with the following power and surge ratings or less can be connected to the 
power inverter.

POWER RATING

MAXIMUM WATTAGE

5 min max. power rating

750 W

Continuous power rating (RATED WATTAGE)

750 W

Surge rating max. (SURGE WATTAGE)

1500 W

Wattage of commonly used devices

IMPORTANT!

The wattages given below are estimates. The actual wattage required for your devices may 

differ from those listed. Be sure to check the specific wattage requirements on the rating 

label and in the operating instructions of devices to be used.

IMPORTANT!

Add up the total wattage of devices to be powered.

TAKE INTO CONSIDERATION THE SURGE WATTAGE REQUIRED BY ELECTRICAL MOTORS 

AS WELL AS THE RATED WATTAGE.

PRODUCTS

WATTS REQUIRED

PRODUCTS

WATTS REQUIRED

Portable music

MP3 player  

Digital camera  

Smartphone/Tablet 

Laptop computer 

13" television 

10 W

10 W 

10 W  

20–30 W

60 W 

100 W

Handheld gaming device

27" television

Food processor

Small appliance

Power tool 

130 W

280 W 

350 W  

450 W

600 W 

12

model no. 011-1901-4  |  contact us:  1-877-466-8191

13

OPERATION

OPERATION

Summary of Contents for 011-1901-4
















Reviews: