Connecting the power inverter
CAUTION!
Prior to connecting to the power source:
Make sure that the total wattage of the devices you are planning to connect to the power
inverter does not exceed the maximum load of the respective power outlet:
LOAD CONNECTED (W)
CONNECTION WITH
12 V OUTLET PLUG
CONNECTION WITH
CAR BATTERY
Continuous load under 100 W
Yes
Yes
Continuous load between 100 and 750 W
No
Yes
750W
Connecting the connector cables to the power inverter
• Make sure that the power inverter is switched off by verifying the digital display (D) is off.
• If the power source can be switched off, switch it off as well.
• Choose the cable (I/J) suitable for connecting the AC products that you want to operate.
CAUTION!
Only use the cables provided with your power inverter.
• Connect the cable with the DC cabling terminals (B/C) on the back of the power inverter.
CAUTION!
Only use products provided by the 12 V outlet plug. Make sure to connect the
RED
CABLE TO POSITIVE PORT (+)
and the
BLACK CABLE TO NEGATIVE PORT (
–
)
• Place the red cable connector on the positive
DC cabling terminal (+/red). Make sure that
the respective holes are matching. Screw the
red cap back on the cabling terminal until
the cable connector is tightly fixed.
• Place the black cable connector on the
negative DC cabling terminal (–/black). Make
sure that the respective holes are matching.
Screw the black cap back on the cabling
terminal until the cable connector is tightly
fixed.
NEGATIVE (–) BLACK CABLE
CONNECTOR
POSITIVE (+) RED CABLE
CONNECTOR
16
model no. 011-1901-4 | contact us: 1-877-466-8191
17
OPERATION
OPERATION
