background image

4

model no. 011-2064-0  |  contact us:  1-888-942-6686

5

IMPORTANT SAFETY WARNINGS

IMPORTANT SAFETY WARNINGS

Operation Temperature. 

This product is designed to work in ambient tempera-

tures between -30°C to 60°C

 

(-22°F to 140°F). Do not operate outside of tempera-

ture range. Do not jump start a frozen battery. Discontinue use of product immedi-

ately if the battery becomes excessively warm.

Storage. 

Do not use or store your product in areas with high concentrations of 

dust or airborne materials. Store your product on flat, secure surfaces so it's not 

prone to falling. Store your product in a dry location. The storage temperature is 

-20°C to 25°C (-4°F to 77°F) (average temperature). Never exceed 80°C (176°F) 

under any condition.

Compatibility. 

The product is only compatible with 12-volt lead-acid batteries 

only. Do not attempt to use product with any other type of battery. Jump starting 

other battery chemistries may result in injury, death or property damage. Contact 

the battery manufacturer prior to attempting to jump start the battery. Do not jump 

start a battery if you are unsure of the battery's specific chemistry or voltage.

Medical Devices.

 Product may emit electromagnetic fields. Product contains 

magnetic components which may interfere with pacemakers, defibrillators, or 

other medical devices. These electromagnetic fields may interfere with pacemak-

ers or other medical devices. Consult with your physician prior to use if you have 

any medical devices including pacemakers. If you suspect the product is interfering 

with a medical device, stop using the product immediately and consult your 

physician.

Medical Conditions.

 If you have any medical conditions that you believe could be 

affected by product, including but not limited to: seizures, blackouts, eyestrain or 

headaches, consult your physician prior to use of product. 

Cleaning. 

Power off the product before attempting any maintenance or cleaning. 

Clean and dry product immediately if it comes in contact with liquid or any type of 

contaminant. Use a soft, lint-free (microfibre) cloth. Avoid getting moisture in 

openings.

Explosive Atmospheres. 

Obey all signs and instructions. Do not operate product 

in any area with a potentially explosive atmosphere, including fueling areas or 

areas which contain chemicals or particles such as grain, dust or metal powders.

High-consequence Activities.

 This product is not intended for use where the 

failure of the product could lead to injury, death or severe 

environmental damage.

The battery.

 The built-in lithium-ion battery in the product must be recycled or 

disposed of separately from household waste. Don't attempt to replace the 

battery yourself and do not handle a damaged or leaking lithium-ion battery. 

Never dispose of battery in household trash. Disposal of batteries in household 

trash is unlawful under provincial environmental laws and regulations. Always 

take used batteries to an your local battery recycling centre. If the product battery 

is excessively hot, emitting odour, deformed, cut, or is experiencing or demon-

strating an abnormal occurrence, immediately stop all use.

Battery Charging. 

Charge the product with the included USB charge cable and 

10 W 12 V Car Charger. A third party USB cable and 5 W or 10 W Car Charger that 

may be compatible. Be cautious of using low quality power adaptors, as they may 

present a serious electrical risk that can result in injury to person, device and 

property.

 

Using damaged cables or chargers, or charging when moisture is present, can 

result in electric shock. Using generic or third party power adaptor may shorten 

the life of your product and cause the product to malfunction. MotoMaster is not 

responsible for the user's safety when using accessories that are not approved by 

MotoMaster.

When using a AC plug 

(not included)

 to charge the product, 

make sure that the 

end of charging cable is fully inserted into the AC plug

 before you plug it into a 

power outlet. It may become warm during normal use, and prolonged skin 

contact may cause bodily injury. Always allow adequate ventilation around power 

adaptors when using them.

To ensure maximum battery life, avoid charging your product for more than a 

week at a time, as overcharging may shorten battery life. Over time, an unused 

product will discharge and must be recharged before use. Disconnect the product 

from power sources when not in use. Use the product only for its intended 

purposes.

During Charging

The normal charging temperature range for the internal 

battery is 0ºC to 45ºC. If the battery temperature exceeds 

45ºC, the        icon will appear on the display and the unit 

will stop charging. The unit will resume charging once the 

battery cools below 45ºC.

During Use

Over-temperature Damage

The normal operating temperature range for the internal 

battery is 0ºC to 60ºC. If the battery temperature exceeds 

60ºC, the       icon will appear on the display and unit 

functions will be inoperable. The unit will resume functions 

once the battery cools below 50ºC.

If the battery temperature exceeds 80ºC, both the        

and       icons will appear on the display and the unit 

functions will be inoperable. If, after cooling down, 

the        icon disappears but the       icon remains, the 

internal battery has been permanently damaged from 

being exposed to excessive heat. Immediately stop all use 

of the product.

High Temperature Protection

Summary of Contents for 011-2064-0














Reviews: