33176
Page 2
WARNING: Shut off air supply and drain residual pressure before attempting to service any part of the system!
M-60 Sub-Micronic Filter
Element should be replaced when it becomes saturated with water or when desiccant cartridge is replaced. Remove filter bottom housing by turning t-handle CCW. Grasp element by
hand and remove. Install new element. Wash sludge and sediment from housing with warm, soapy water. Inspect seal and replace if damaged or distorted. Reassemble housing,
taking care not to damage threads. T-handle should only be hand tightened, do not use external leverage.
MHT-7300 Precision Air Regulator
On detection of air leaks, pressure fluctuation or pressure creep, depressurize system and remove bottom cap. Inspect valve seat for damage or wear. Inspect seat in head casting for
foreign material or damage. Clean with kerosene and blow out with air. Replace any damaged parts.
If leak persists, remove bonnet and inspect diaphragm and seat for wear or foreign materials.
To replace diaphragm, remove four screws holding bonnet. Remove diaphragm and spring. Clean diaphragm seat and replace diaphragm and spring. Replace bonnet and reinstall
screws. Tighten gradually and firmly.
Replacement Parts
Motor Guard Corporation assumes the responsibility of providing equipment that is free from defects in workmanship and material. Should this product fail due to a defect in
workmanship or material, Motor Guard Corporation will repair or, at its option, replace the product without charge, other than the transportation charges, provided that the product is
returned to the factory, transportation prepaid, within one year of the date of purchase. Please contact Motor Guard Corporation for return authorization and shipping instructions.
This limited warranty does not cover damage to the product due to neglect, misuse or accident, nor does it cover any loss, damage or expense, either direct, indirect or consequential,
arising from the non-function of this product. This limited warranty notice replaces any other warranty information, implied or otherwise, enclosed with this product or appearing in
literature referring to this product.
MAINTENANCE
.
Key
Part No
Description
Qty.
1
42687
Shut-
Off Valve 1/2”NPT
1
2
M-723
Replacement Element Pk/4
1
3
106-10
Seal
1
4
42489
Nipple 1/2”NPT x CL
2
5
RG4045
Gauge, 0-160 PSI
1
6
RK7300
Diaphragm Kit
1
12006
Mounting Bracket
2
LIMITED WARRANTY
.
