Preservation
If the vehicle is not used for a long time such as in winter or other seasons, be sure to
preserve it with some appropriate materials, equipment and techniques. If you prefer
preserving the vehicle yourself, you can proceed as follows:
Vehicle:
Place the vehicle on the center stand and give it a thorough cleaning.
Fuel:
①
Mix the fuel with a certain amount of fuel stabilizer and fill the fuel tank fully
with the mixture.
②
Drain off the fuel from the carburetor or allow the engine to run for
a few minutes until the mixed fuel flows into the carburetor.
Battery: Dismount the battery from the vehicle. Be sure to unwire the negative terminal
before unwiring the positive terminal. Clean the battery surface with a thin cleaning
solution and clean the terminals and wire leads of rust marks. Keep the battery in an
area with a room temperature of above 0°C.
Tires:
①
Inflate the tires to the normal pressure.
Vehicle surfaces:
①
Spray all the vinyl resin and rubber parts with rubber protecting
agent.
②
Spray the unpainted surfaces with antirust agent.
To put the vehicle back to use, proceed as follows:
—
Clean the vehicle completely.
—
Remove the spark plug, push the kick starter lever with the foot to run the engine
several times and install the spark plug again.
—
Reinstall the battery.
Summary of Contents for XO 125
Page 1: ...XO 125 User s Manual...
Page 28: ...Wiring Diagram...
