EN
18
2 - INTRODUCING THE PRODUCT
The FLASH24 gear motors are destined to be installed in sys
-
tems for the automation of gates with hinged doors.
The FLASH24 gear motors have been designed and constructed
to be fitted onto hinged doors within the weight limits indicated
in the technical specifications table. The use of gear motors for
applications which differ from those indicated above is prohibited.
2.1 - Description of the product
TECHNICAL DATA
MODELS
FLASH24
Torque
Nm
250
Working cycle
%
80
Opening time at 90°
sec
18-25
Control unit
CC24FLASH
Power supply
Vac (Vdc)
24 Vdc
Absorption
A
5
Engine power
W
120
Capacitor
µF
-
Thermoprotection
°C
-
Degree of protection
IP
IP67
Dimensions (L-P-H)
mm
412 - 346 - 160
Weight
Kg
10,8
Operating temperat.
°C
-20°+55°
Leaves maximum weight
Kg
600
2.2 - Model and technical characteristics
The CC24 control unit is a modular system for the control of Motori
-
sation Plus motors for the electric opening and closure of swing and
sliding gates, barriers and garage doors.
The CC24 menu structure allows easy setting of working times and
operating modes. All other, improper, use of the control unit is for
-
bidden.
2.3 - Description of the control unit
WARNING:
the power module must
always be connected/
disconnected with the
control unit not powered
up!
1
2
Code
Description
FLASH24
For swing gates with maximum length 3,5 m, 24 Vdc motor, without encoder, with opening and closing
mechanical stops
Summary of Contents for FLASH24
Page 39: ...39 IMAGES Fig 1 FR Attention EN Attention PT Aten o...
Page 41: ...INSTALLER DATA INSTALLER DATA DATE SIGNATURE...
Page 42: ...42 NOTE...
Page 43: ...43...
