13A
13B
25.A
22
23
24
25
19
20
21
01
18
26
27
1 mm
EN
EN
SAFE INSTALLATION
SAFE INSTALLATION
Repeat the previous steps for a second sheet if necessary !!!
22 and 23.
Aim the plates inside the clamp at the cart screws and tighten them.
Press the screws indicated to fix the sheet to the cart. Always paying attention to the align-
ment of the sheets with each other and the distance from the wall.
24.
Use the thread again so that the
cart go up together with the door. THE
glass should be between 8 to 10mm apart
from soil.
25.
Pull the anti-derailment plates upwards,
so that it is 1 mm of the profile as in figure
25.A.
19.
Raise the glass and place it under the door,
aligned with the carts that will hold it.
20.
Slightly loosen the indicated screws
in the image.
21.
Now turn the indicated screw so that
the front part of the cart goes down as far as
it will go.
18.
Use a card or other protective material
under the door so as not to damage the
equipment.
26.
Tighten the 2 small screws to secure
anti-derailments 1mm from the profile.
27.
Finally, tighten the fixing the cart.
04. INSTALLATION
04. INSTALLATION
