6
3
1 2
3
3
4
5
1
2
EN
03. INSTALLATION
MARKING THE HOLES
Position the wall bracket at the desired installation location between a height of 1.5m and
2m.
DRILL HOLES
Drill holes. Replace the wall bracket and attach the two brackets to the wall through the
bracket.
FIX THE ANTENNA
Attach the antenna to the fixing bracket with the four screws, force rings and washers
successively, provided in the kit
POSITION THE ANTENNA
Position the antenna at the angle that is most convenient for you to read the MB3.
CONNECTING ANTENNA
Connect the antenna to the MCA, the RS232 cable to the computer and the power supply
according to the diagrams on the following pages.
STEPS TO FOLLOW
The same antenna can not be used for inputs and outputs. You will need to get an
antenna for each effect.
