5A
5B
EN
EN
04. INSTALLATION
INSTALLATION SITE PREPARATION
BOOM ASSEMBLY
04. INSTALLATION
1 • With the bolts already fixed on the cement
foundation, respecting the dimensions of point
2, place the barrier on top of the foundation in
a way that the screws stay inside and centered
with the barrier.
2 • Open the door using the key to unlock it, and pull
it to the outside.
3 • Place the fastening metal plates and fix the barrier
to the ground tightening the nuts supplied with the
product.
To assemble the boom, you must place the boom
on the barrier fixing plate and align the four holes
on each piece. Then, you just need to place the
boom fastening metal plate and use the screws to
fasten the three parts together.
After assembling the boom, you must define the length of it so that you can fix the boom support, as visible
on the image above.
When the boom’s length is decided, fix it with the two small screws situated at the end of the fix part of
the boom.
BOOM SUPORT INSTALLATION
