13A
13B
12A
12B
EN
EN
FOLLOW ME
01
• Press MENU for
10 seconds.
02
• E0 appears.
Press ↓ three times.
03
• E3 appears.
Press MENU for 3
seconds.
05
• Press MENU to
save the defined
function.
06
• E4 and E5 menus not available.
To program E6, continue in step 3 from E6 menu (page 12B).
To exit the programming press ↑↓ simultaneously.
00 disabled function
01 enabled function
This menu allows you to activate the option Follow me.
With this function activated whenever the photocells detect the
passage of a user/obstacle, the control board triggers the closing
operation after 3 seconds.
To activate Follow me function, P5 have to be set with:
HE = 01 / HC = 00 (see page 9A)
(Factory default
01
)
05. PROGRAMMING "E"
04
• Appears the
function currently set.
If you want, change
the function to 00 or
01, using
↑↓.
min.
max.
4
1
01
• Press MENU for
10 seconds.
This menu lets you set the deceleration speed in
opening and closing.
The higher the level, the faster is the deceleration.
(Factory default
09
)
min.
max.
1
9
02
• E0 appears.
Press ↓ six times.
03
• E6 appears.
Press MENU for 3
seconds.
05
• Press MENU to
save the defined
value.
04
• Appears the
value currently set. If
you want, change the
function to 01 or 09,
using
↑↓.
06
• E7 appears.
To program E7, continue in step 3 from E7 menu (page 13A).
To exit the programming press ↑↓ simultaneously.
COURTESY LIGHT TIME
05. PROGRAMMING "E"
E4 MENU NOT AVAILABLE.
E5 MENU NOT AVAILABLE.