14A
14B
13A
13B
EN
EN
06
• E2 appears.
To program E2, continue in step 3 from E2 menu (page 13B).
To exit the programming press ↓↑ simultaneously.
COURTESY LIGHT TIME
01
• Press MENU for
10 seconds.
00 disabled function
01 enabled function
This menu allows you to enable/disable soft start.
With soft start function enabled, at each motion beginning, the
control board will manage the start of the motor, gradually
increasing in the first second of working.
(Factory default
00
)
02
• E0 appears.
Press ↓ once.
03
• E1 appears.
Press MENU for 1
second.
05
• Press MENU to
save the defined
function.
SOFT START
01
• Press MENU for
10 seconds.
02
• E0 appears.
Press ↓ twice.
03
• E2 appears.
Press MENU for 1
second.
05
• Press MENU to
save the defined time.
This menu allows you to define the time (from 1 to 99 minutes) that
the courtesy light stays on after the gate has completed an opening or
closing operation.
This menu is only available if the Courtesy Light function is active in
the P8 menu (see page 11B)
(Factory default
01
)
06
• E3 appears.
To program E3, continue in step 3 from E3 menu (page 14A).
To exit the programming press ↓↑ simultaneously.
04
•
Appears the time
set from factory. If
you want, change
time between 1 and
99 sec., using ↓↑.
05. PROGRAMMING "E"
05. PROGRAMMING "E"
04
• Appears the
function currently set.
If you want, change
the function to 00 or
01, using
↓↑.
