98
EN
02
•P0 appears.
Press ↓ twice.
06
•
Press MENU for
1 second,
to save the
defined value.
09
•
Press MENU for
1 second,
to save the
defined value.
03
• P2 appears.
Press MENU for 1
second.
04
• F0 appears.
Press MENU for 1
second.
05
•
Appears the
value defined from
factory. If you want,
change the value
from 1 to 9 using ↓↑.
08
•
Appears the
value defined from
factory. If you want,
change the value
from 1 to 9 using ↓↑.
11
•
Appears the
value defined from
factory. If you want,
change the value
from 1 to 9 using ↓↑.
07
• FS appears.
Press MENU for 1
second
.
01
• Press
MENU
for
3 seconds.
10
• Fd appears.
Press MENU for 1
second
.
12
•
Press MENU for
1 second,
to save the
defined value.
SETTING STRENGTH AND SENSITIVITY
13
• P3 appears.
To program P3, continue in step 3 from P3 menu (page 9A).
To exit the programming press ↓↑ simultaneously.
04. PROGRAMMING "P"
If you set the sensitivity (FS) to a value greater than 1, the force (FO) is automatically set to
9
without the possibility to change it.
Note:
If the control board has very high sensitivity values, you may see the
LI
error.
After four attempts, the
LI
error will turn
ER
.
You will have to wait 10 sec. to return to program the automatism.
Strength adjustment
It allows to regulate the
motor's operation force
when opening and closing.
The control board is supplied with this function
disabled. To activate the function, you must make
a new programming of the course. This will allow
the control board to assume new settings.
Sensitivity adjustment
It allows you to adjust
the engine sensitivity in
detecting obstacles. The
higher the sensitivity the
less effort is needed to
detect any obstacle and
reverse the direction.
Deceleration sensitivity
adjustment
It allows you to adjust
the sensitivity during the
deceleration.
(Factory default
06
)
(Factory default
00
)
(Factory default
00
)
min.
max.
1
9
min.
max.
1
9
min.
max.
1
9
