7A
7B
8
MENU INC
DEC
GND
GND
OP-L
OP-R
CO
M
VC
C
ZER
O
P+
P-
GND
R
G
v+
12v
GND
M1
24V
M2
24V
+24v
EN
EN
• All external components of the turnstile (barriers, legs and structure) must be cleaned regularly to
ensure proper functioning.
• Acidic or basic chemicals should not be used on the turnstile sheet surface.
• All sheet metal surfaces must be cleaned with a stainless maintenance spray. If you do not have a
spray with the characteristics indicated, contact your supplier for advice.
• The mechanism must be cleaned and lubricated periodically every six months. For this purpose,
suitable lubricating grease must be used.
• The damper and brake settings of the mechanism must be checked and adjusted during
maintenance.
• The interior must be cleaned regularly with a dry cloth and must not be exposed to dust.
05. PROGRAMMING
NAVIGATION IN THE MENUS
01 •
To access the functions press the
MENU
for 1 second.
02 •
Use
DEC
and
INC
to navigate between functions.
03 •
Press
MENU
to enter the desired function.
04 •
Use
DEC
and
INC
to choose the desired value for the
function.
05 •
Press
MENU
to save the value.
• After 5 seconds without
button operation, it
will automatically exit
programming.
FUNCTIONS
MENU
FUNCTION
FACTORY VALUE
FACTORY
VALUE
MINIMUM
VALUE
MAXIMUM
VALUE
RELAY TIME
ADJUSTMENT
It allows defining the time between the
release of the arms (impulse to open) and the
passage block.
Value 1 = 1 second
005
000
030
PASSAGE
PERMISSIONS
000 •
Right and left opening totally prohibited
001 •
Both allowed
002 •
Left opening prohibited, right opening
allowed
003 •
Right opening prohibited, left opening
allowed
001
-
-
OPERATION
MODE
000 •
Free passage
001 •
Free passage when there is a power cut
001
-
-
OCCUPANCY
LIMIT
000 •
Disabled
001 •
Allows you to define a maximum
occupancy number, blocking the passage if
the space capacity is at the limit.
(* Connection of an occupancy control system
is required - Example: PORTER)
000
000
999
MAINTENANCE
To make the maintenance of the turnstile, ensure that it is disconnected from the power
supply.
06. MAINTENANCE
