• Alert – for events triggered by an application.
• Callout – for events triggered by Call-Out alert.
A category may have many or few associated events.
The number of tones is limited to eight .wav files. A specific tone may be used for indicating several
different events. You can use CPS to upload, delete, and allocate user tones in user profile settings.
The "right" tone or event loudness is an objective matter. Motorola Solutions TETRA terminal tones
architecture is highly flexible and allows you to adjust the level of every tone-event (such as valid
keypress) individually, and at the same time to adjust the level of all events associated with a tone
category.
3.9
Volume Adjustment Mode
The Volume Control Mode is configurable using the Customer Programming Software (CPS).
You can configure the maximum volume offsets (dB) and the volume range (dB) through CPS. The
field is
Audio Settings
→
User Profile
. The volume control in the radio is divided into 13 steps, from 0
to 14. If for example, the
vol. range
is set to 39, each step on the volume indication bar is 3 dB.
3.10
Audio Features
Different audio quality and adaptive audio parameters can be configured according to the working
environment.
The demand of audio quality changes according to the working environment. For example, an airport
worker experiences different audio quality at various sites. Working in the field is noisier compared to
inside the airport.
3.10.1
Audio Profiles
Audio profiles can be used to adjust the audio settings of the radio to fit different operating
environments.
You can select the corresponding audio profiles which are mapped to "User Profiles" generated
in CPS. It is possible to enable and customize up to four audio profiles using CPS (
Audio
Settings
→
User Profile
). The following parameters can be changed in a User Profile:
• Tone offset and ranges
• Vibrate Alert
• LED On/Off state
NOTE:
Audio Profile names in the Radio MMI correspond to the Profile Alias/Name parameter
value for the corresponding User Profile in CPS.
Using the CPS you can create an audio profile using the four User Profiles. You can also enable/
disable an audio profile in the codeplug and give an alias/name to a particular profile configured in the
codeplug.
The audio profiles are created and maintained independent of each other. Creating or modifying one
audio profile does not have any impact on the others.
The radio enables toggling audio profiles using the menu or using the One-Touch Button.
MN003465A01-AF
Chapter 3 : Man-Machine Interface
60