•
Cells Info
– Cell Information – displays information about the foreground and background cells
(BTS sites). This menu displays the RSSI levels of the cells.
•
Cell Lists
– Displays frequency lists.
- Frequency
List1
(32 variable frequencies)
- Frequency
List2
(32 fixed frequencies)
- Frequency
List3
(comprehensive hunt)
- Frequency
List4
(comprehensive hunt)
•
Data Svc
– Data Services – allows access to the air tracer enable, the conformance tests, and the
KVL mode.
-
Air Tracer
-
Conf Test
– Conform test.
-
KVL Mode
NOTE:
You can exit KVL Mode by power cycle.
-
E2E Key Del
-
MS Logging
•
CE Monitor
– Circulator Eliminator Monitor.
•
Key Info
– Key Information allows the radio to display security information for the following
conditions:
- For the serving cell:
+
Curr Cell SC
– Security class of the serving cell, that is Security Class 1, Security Class 2,
Security Class 3, Security Class 3 with Group Cipher Key (GCK).
- For the group OTAR:
+
CMG GSSI
– Crypto-Management Group (CMG) group of MSs with common key material
- For SDMO and TM-SCK OTAR:
+
SCK SubsGrType
– SDMO SCK Subset Grouping Type.
+
Curr Subs Info
– current SDMO SCK Subset Number and SCK-VN.
+
Fallback TMSCK
– current Fallback TMO SCK, that is SCKN and SCK-VN attributes.
+
SCK List
– list all SCKs stored in the radio, that is SCKN and SCK-VN attributes .
NOTE:
When checking for SDMO key information in the radio, the SDMO KAG range
in the AuC is from 0 to 9 and the range in the radio is from 1 to 10.
- For the GCK:
+
Full GCK-VN
– current Full GCK-VN.
+
GCK List
– list all GCKs stored in the radio, that is GCKN and GCK-VN attributes.
3.13
Radio Info
Depending on the codeplug configuration the manufacturer, type, and serial number information is
available. The information is available through the service page accessible from the MMI.
The Radio Info provides the following data:
• Manufacturer
MN003465A01-AF
Chapter 3 : Man-Machine Interface
62
