Select Disabled
Select-disabled radios cannot change channels while dynamically regrouped. The radio is forced to
remain on the dynamic-regrouping channel.
The Scan and Private Call features are unavailable when your radio is Select Disabled.
6.1.5.2
Requesting a Reprogram (Trunking Only)
This feature allows you to notify the dispatcher when you want a new dynamic regrouping assignment.
Procedure:
Perform one of the following actions:
• Press the preprogrammed
Reprogram Request
button to send a reprogram request to the
dispatcher.
•
or to
Rpgm
then press the
Menu Select
button directly below
Rpgm
to send reprogram
request to the dispatcher.
The display shows
Reprogram Rqst
and
Please wait
.
If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows
Ack received
and the radio returns to the
Home
screen.
If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-
pitched alert tone and the display shows
No acknowledge
. Try again or press
to cancel and
return to the
Home
screen.
6.1.6
Dynamic Zone Programming
Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used
channels for conventional or trunking.
NOTICE:
Your radio must be preprogrammed for you to use this feature. At least one zone in
the radio must be a non-dynamic zone.
6.1.6.1
Entering the Dynamic Zone to Select a Dynamic Channel
Procedure:
1
or to
Zone
then press the
Menu Select
button directly below
Zone
.
The display shows the
Zone
screen.
2
or
to
<# Dynamic Zone Channels>
3
Perform one of the following actions:
• Press the
Menu Select
button below
Sel
to select.
• Press the
Menu Select
button below
Exit
to exit.
If you have selected one of the Dynamic Zone Channels list, the display returns to
Home
screen
with the selected
<# Dynamic Zone Channels>
shown on the screen.
2
# indicates number of the channel on the 16-Position Switch which are numbered from 1 to 16.
MN003110A01-AK
Chapter 6: Advanced Features
42
