• A query (ASTRO 25 Advanced Messaging Solution).
NOTICE:
Query is only supported in the ASTRO 25 Advanced Messaging Solution. For more
ASTRO 25 Advanced Messaging Solution on page 69
6.14.1
Sending a Quick Text Message
When and where to use:
Quick Text messages are messages that are predefined and usually consist of messages that are
used most frequently.
Each Quick Text message has a maximum length of 50 characters. You can select the required text
from the Quick Text.
Procedure:
1
Perform one of the following actions:
• To access this feature using the preprogrammed button, press the preprogrammed
Quick
Text
.
• To access this feature using the menu, proceed to the next step.
2
or to
TMS
and press the
Menu Select
button directly below
TMS
to access the TMS feature
screen.
3
Perform one of the following actions:
•
or
to
Compose
and press the
Menu Select
button directly below
Sel
.
• Press the
Menu Select
button directly below
Exit
to return to the Home screen.
4
or
to
Quick Text
and press the
Menu Select
button directly below
Sel
for a
predefined message.
5
or
to scroll through the list of messages and press the
Menu Select
button directly
below
Sel
to select the required message.
The message appears on the
Compose
screen, with a blinking cursor at the end of it.
6
Press the
Menu Select
button directly below
Optn
.
7
or
to
Send Message
and press the
Menu Select
button directly below
Sel
.
8
or
to scroll through the address list and select the required address.
The message is sent after the address is selected.
6.14.2
Priority Status and Request Reply of a New Text Message
Before sending your message, you can append a priority status and/or a request reply to your
message.
MN003110A01-AK
Chapter 6: Advanced Features
64
