MW800 User’s Guide
29
Tips for F5217A Installation
•
Use the AUX 26 pin cable Motorola p/n 3087563V93 for interface to the vehicle
to access to vehicle speed and direction outputs.
Reading the vehicle speed signals
•
Connect the “+” terminal of the vehicle speed signals to the AUX port pin1 (black
wire).
•
Connect the “-” terminal of the vehicle speed signals to the AUX port pin2
(brown wire).
Reading the Forward /Backward drive direction signals
•
Connect the “+” terminal of the vehicle forward/backward drive direction signals
to the AUX port pin 3 (red wire).
•
Connect the “-” terminal of the vehicle forward/backward signals to the AUX port
pin 4 (orange wire).
•
If the vehicle forward/backward signals connection is not utilized, connect AUX
port pin 3 (red wire) to the 5VDC and AUX port pin 4 (orange wire) to the GND.
NOTE:
5VDC signal is available on AUX port pin 25 (blue wire 24 AWG), GND
signal is available on AUX port pin 11 (gray wire 28 AWG)
