SLIP to X.25 (RFC877)
Application Description
This application allows for a Switched Virtual Circuit connection between the
SLIP port and a X.25 Service. The SLIP connection requires the X.25 Service to
establish the connection to the SLIP port. Please note that SLIP does not currently
support PVC Connections over X.25.
The X.25 service will need to call the Node with an address that has the
subaddress equal to the SLIP port number (i.e.,
757503
is valid for connection to
SLIP-3,
999902
is valid for SLIP-2.)
Configuration Summary
Port #1 X.25 (RFC877), ext clk, 16 svc's, DTE
Port #2 SLIP RFC1490 encapsulation, 57600, Auto detect comp.
Port #3 SLIP RFC1490 encapsulation, 57600, Auto detect comp.
•
Connections achieved by the X.25 Service calling the SLIP port.
•
CTP access via CTP switch or X.25 service calling subaddress 98.
Optional Application CMEMs
V1000006.MEM Standard application as mentioned in Summary
V1000006.001 Port #2 PAD, CTP access via PAD/NET/switch
V1000006.002 Port #1 SLIP, Port #2 X.25
V1000006.003 Port #1 PAD, Port #2 X.25
V1000006.004 Port #1 NULL (no daughtercard), Port #2 X.25
V1000006.005 Port #1 X.25, Port #2 X.25 (ISDN Perm B1)
