background image

4

1.2 

Caution

-  

Use of controls or adjustments or 

performance of procedures other than 

those described herein, may result in 

hazardous radiation exposure or other 

unsafe operation.

-  

To reduce the risk of fire or electric shock, 

do not expose this apparatus to rain or 

moisture. The apparatus must not be 

exposed to dripping or splashing and 

objects filled with liquids, such as vases, 

must not be placed on apparatus.

-  

The mains plug/appliance coupler is used 

as the disconnect device, the disconnect 

device must remain readily operable.

-  

D a n g e r   o f   e x p l o s i o n   i f   b a t t e r y   i s 

incorrectly replaced. Replace only with 

the same or equivalent type.

1.3 

Warning

•  

The battery (batteries or battery pack) 

shall not be exposed to excessive heat 

such as sunshine, fire or the like.

•  

Before operating this system, check 

the voltage of this system to see if it 

is identical to the voltage of your local 

power supply.

•  

Do not place this unit close to strong 

magnetic fields.

•  

Do not place this unit on the amplifier 

or receiver.

•  

Do not place this unit close to damp 

areas as the moisture will affect the life 

of the laser head.

•  

If any solid object or liquid falls into the 

system, unplug the system and have it 

checked by qualified personnel before 

operating it any further.

•  

Do not attempt to clean the unit with 

chemical solvents as this may damage 

the finish. Use a clean, dry or slightly 

damp cloth.

•  

When removing the power plug from 

the wall outlet, always pull directly on 

the plug, never yank on the cord.

•  

Changes or modifications to this unit 

not expressly approved by the party 

responsible for compliance will void 

the user’s authority to operate the 

equipment.

•  

The rating label is pasted on the bottom 

or back of the equipment.

 Battery usage CAUTION

 

To prevent battery leakage which may result 

in bodily injury, property damage, or damage 

to the apparatus:
-  

Install all batteries correctly, + and - as 

marked on the apparatus.

-  

Do not mix old and new batteries.

-  

Do not mix alkaline, standard (Carbon-

Zinc) or rechargeable (Ni-Cd, Ni- MH, 

etc.) batteries.

-  

Remove batteries when the unit is not 

used for a long time.

1.4 

Marking

Correct Disposal of this product. 

T h i s   m a r k i n g   i n d i c a t e s   t h a t 

t h i s   p r o d u c t   s h o u l d   n o t   b e 

disposed with other household 

wastes throughout the EU. To 

prevent possible harm to the 

environment or human health 

from uncontrolled waste disposal, recycle it 

responsibly to promote the sustainable reuse 

of material resources. To return your used 

device, please use the return and collection 

systems or contact the retailer where the 

product was purchased. They can take this 

product for environmental safe recycling.

Dolby, Dolby Atmos, and the double-D 

symbol are registered trademarks of 

Dolby Laboratories Licensing Corporation. 

Manufactured under license from Dolby 

Laboratories. Confidential unpublished 

works. Copyright © 2012-2020 Dolby 

Laboratories. All rights reserved.

Summary of Contents for amphisoundX MT250-ASB31



















Reviews: