Device Configuration
5-71
To map a source IP address from an internal network to a NAT IP address click the
+ Add Row
button.
Enter the internal network IP address in
Source IP
field. Enter the NAT IP address in the
NAT IP
field.
Use the
Network
drop-down menu to set the NAT type either
Inside
or
Outside
. Select
Inside
to create
a permanent, one-to-one mapping between an address on an internal network and a perimeter or
external network. To share a Web server on a perimeter interface with the Internet, use static address
translation to map the actual address to a registered IP address. Static address translation hides the
actual address of the server from users on insecure interfaces. Casual access by unauthorized users
becomes much more difficult. Static NAT requires a dedicated address on the outside network for each
host. Inside NAT is the default setting.
10.Select the
Destination
tab to view destination NAT configurations and define packets passing through
the NAT on the way back to the LAN are searched against to the records kept by the NAT engine. The
destination IP address is changed back to the specific internal private class IP address to reach the LAN
over the network.
Figure 5-40
NAT Destination screen
21. Select
Add
to create a new NAT destination configuration,
Edit
to modify or override the attributes of
an existing configuration or
Delete
to permanently remove a NAT destination.
Summary of Contents for AP-6511
