Motorola AP-7131N-FGR Product Reference Manual Download | Manualshive

Page: 217 / 708

background image

Network Management

5-69

be defined from within the WLANs assigned to BSSID groups 1 through 4. Each BSSID
beacons only on the primary WLAN.

The user should assign each WLAN to its own BSSID. In cases where more than four WLANs
are required, WLANs should be grouped according to their security policies so all of the
WLANs on a BSSID have the same security policy. It is generally a bad idea to have WLANs
with different security policies on the same BSSID, as this will result in warning or error
messages.

8.

Use the

Primary WLAN

drop-down menu to select a WLAN from those WLANs sharing the

same BSSID. The selected WLAN is the primary WLAN for the specified BSSID.

9.

Click

Apply

to save any changes to the Radio Settings and Advanced Settings screens.

Navigating away from the screen without clicking Apply results in changes to the screens
being lost.

10. Click

Undo Changes

(if necessary) to undo any changes made to the screen and its sub-

screens. Undo Changes reverts the settings to the last saved configuration.

NOTE

When using a AP-7131N-FGR dual-radio access point, 4 BSSIDs for the
802.11b/g/n radio and 4 BSSIDs for the 802.11a/n radio are available.

WLAN

Lists the WLAN names available to the 802.11a/n or 802.11b/g/n
radio that can be assigned to a BSSID.

BSSID

Assign a BSSID value of 1 through 4 to a WLAN in order to map the
WLAN to a specific BSSID.

BC/MC Cipher

A read only field displaying the downgraded BC/MC (Broadcast/
Multicast) cipher for a WLAN based on the BSSID and VLAN ID to
which it has been mapped.

Status

Displays the following color coded status:

Red

- Error (Invalid Configuration)

Yellow

- Warning (Broadcast Downgrade)

Green

- Good (Configuration is OK)

Message

Displays the verbal status of the WLAN and BSSID assignments. If
the Status column displays green, the Message will typically be

Configuration is OK

. If yellow, a description of invalid

configuration displays.

«
...
215
216
217
218
219
...
»

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131N-FGR

Brand: Meru Networks Pages: 66

Brand: AirLive Pages: 2

Wireless Access Point 150

Brand: Hamlet Pages: 172

Brand: Inseego Pages: 68

Brand: Netis Pages: 16

Wi-Fi Bubble SpitFire

Brand: NAUTITECH Pages: 22

Brand: Cambium Networks Pages: 51

NUCLIAS CONNECT DAP-2680

Brand: D-Link Pages: 48

Brand: D-Link Pages: 24

Brand: D-Link Pages: 24

Brand: D-Link Pages: 24

Brand: D-Link Pages: 25

Brand: D-Link Pages: 26

nuclias connect DAP-2662

Brand: D-Link Pages: 12

Nuclias Connect DAP-2622

Brand: D-Link Pages: 86

Brand: D-Link Pages: 18

Nuclias Connect DAP-2622

Brand: D-Link Pages: 8

Nuclias DBA-2520P

Brand: D-Link Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands