Motorola AP-7131N-FGR Product Reference Manual Download

Page: 256 / 708

AP-7131N-FGR Access Point Product Reference Guide

6-28

Ensure the WAN ports are connected via the internet

Select

Network Configuration

WAN

VPN

from the access point menu tree.

Enter any tunnel name (tunnel names do not need to match).

Enter the WAN port IP address of AP #1 in the

Local WAN IP

field

Enter the LAN IP subnet and mask of AP #2 in the

Remote Subnet

and

Remote Subnet Mask

fields,

Enter the WAN port IP address of AP #2 in the

Remote Gateway

field

Click

Add

to add the tunnel to the list.

Select the

Auto (IKE) Key Exchange

button.

Select

Auto Key Settings

10. Select

ESP with Authentication

and

AES 128-bit

. Click

11. Select the

IKE Settings

button.

12. Select

Pre Shared Key (PSK)

13. Enter the Passphrase.

Passphrases must match on both VPN devices.

14. Select

AES 128-bit

15. Select

Group 2

16. Click

This will take you back to the main VPN configuration screen.

17. Click

Apply

to save the updates

18. Select

Network Configuration

WAN

VPN

VPN Status

from the access point

menu tree. Check the VPN status on the access point.

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AP-7131N-FGR

Reviews:

Related manuals for AP-7131N-FGR

Brands by name

Popular brands

Motorola AP-7131N-FGR, Product Reference Manual

Search results

Summary of Contents for AP-7131N-FGR

Reviews:

Related manuals for AP-7131N-FGR

Brands by name

Popular brands