manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

The Motorola AP-7131N-FGR is a high-performance wireless access point renowned for its reliable connectivity. Ensure seamless installation with the comprehensive Installation Manual available for free download at 88.208.23.73:8080. Explore this manual to maximize the product's potential and unlock its advanced features effortlessly.

Share
Download
background image

AP-7131N-FGR Access Point Product Reference Guide

IN-8

statistics, WAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
statistics, WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
suspended T-Bar installations  . . . . . . . . . . . . . . . . . . . 2-13
support center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
system configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
system location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
system name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
system settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
system settings, configuration . . . . . . . . . . . . . . . . . . . . 4-2
system uptime. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

T

technical support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
testing connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
testing connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
theory of operations . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23
transmit power control . . . . . . . . . . . . . . . . . . . . . . . . . 1-17
type filter, configuration . . . . . . . . . . . . . . . . . . . . . . . . 5-15

V

VLAN support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14
VLAN, configuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
VLAN, management tag . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
VLAN, name  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

VLAN, native tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-8
Voice prioritization  . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-16
VPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-13
VPN Tunnels  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-13
VPN, auto key settings  . . . . . . . . . . . . . . . . . . . . 6-33, 6-34
VPN, configuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-23
VPN, IKE key settings  . . . . . . . . . . . . . . . . . . . . . . . . . .6-36
VPN, manual key settings . . . . . . . . . . . . . . . . . . . . . . .6-29
VPN, status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-39

W

wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10
WAN port  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9
WAN, configuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-16
WAN, port forwarding  . . . . . . . . . . . . . . . . . . . . . . . . .5-24
WAN, statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
WLAN, ACL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-37
WLAN, creating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-31
WLAN, editing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-31
WLAN, enabling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-28
WLAN, security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-36
WLAN, statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-12
WPA2-CCMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12, 6-12
WPA2-CCMP (802.11i)  . . . . . . . . . . . . . . . . . . . . . . . . .1-12
WPA2-CCMP (802.11i)  . . . . . . . . . . . . . . . . . . . . . . . . .1-12

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131N-FGR

Quectel EC200 Series Application Note preview
EC200 Series
Brand: Quectel Pages: 28
LevelOne WAB-5120 Quick Installation Manual preview
WAB-5120
Brand: LevelOne Pages: 14
EnGenius EOC5510 Quick Start Manual preview
EOC5510
Brand: EnGenius Pages: 2
Xsense Connectivity WSR-5000 User Manual preview
WSR-5000
Brand: Xsense Connectivity Pages: 56
MachPower WL-CPE5G24-059 User Manual preview
WL-CPE5G24-059
Brand: MachPower Pages: 26
Deliberant DLB70XX User Manual preview
DLB70XX
Brand: Deliberant Pages: 69
Edimax EW-7203APg Specifications preview
EW-7203APg
Brand: Edimax Pages: 2
AirLive W6184QAX User Manual preview
W6184QAX
Brand: AirLive Pages: 46
PROLiNK PRT7010L Quick Installation Manual preview
PRT7010L
Brand: PROLiNK Pages: 28
NETGEAR Verizon Jetpack AC791L Manual preview
Verizon Jetpack AC791L
Brand: NETGEAR Pages: 2
Teleconnect ANGLOPACK Comtrend CT-6382T Quick Setup Manual preview
ANGLOPACK Comtrend CT-6382T
Brand: Teleconnect Pages: 6
Symbol AP-51 Series Product Reference Manual preview
AP-51 Series
Brand: Symbol Pages: 100
Air Live AirMax2 Quick Setup Manual preview
AirMax2
Brand: Air Live Pages: 2
Air Live WH-5420CPE Quick Setup Manual preview
WH-5420CPE
Brand: Air Live Pages: 103
Air Live Air Live WL-5470AP Quick Setup Manual preview
Air Live WL-5470AP
Brand: Air Live Pages: 135
D-Link DIR-2640 User Manual preview
DIR-2640
Brand: D-Link Pages: 162
AmbiCom WL54-AR Specifications preview
WL54-AR
Brand: AmbiCom Pages: 2
Wireless interactive RedFire 200e User Manual preview
RedFire 200e
Brand: Wireless interactive Pages: 58

Brands by name

Popular brands

Load more brands